Example of Category Blog layout (FAQs/General category)
How many manufacturers produce asphalt shingles?

There are many small manufacturers of asphalt shingles in America, but the four recommended large manufacturers of asphalt shingles are G.A.F., Elk, Owens Corning, and Certainteed. We strongly recommend the four major companies to our clients due to their outstanding service and products.

When is the best time to put on a new roof?

The optimum time to install a roof is when the temperatures are above freezing and the wind and rain are at the lowest intensity and frequency. This allows the roofer the best conditions for installation, with the fewest interruptions and lowest risk of leaking. Unless you are very fortunate, sometimes you cannot schedule the roofing work during these periods, and you may need to install the roof in cold temperatures, or in the rainy season. If you know this in advance, it may be possible to choose a roof system that is more tolerant of inclimate weather.

How many shingle layers can I put on a roof?

Most building codes allow a structure to have two roof membranes in place, but not a third. The codes are also now requiring all roof layers to be removed once the two roof limit has been reached, when looking to install the third roof.

What type of certification does Miller Brothers Roofing, LLC have for roofing?

Miller Brothers Roofing, LLC is very proud and honored to have been awarded the prestigious title of "Master Elite" roofing contractor by the G.A.F. corporation. G.A.F. is America’s largest asphalt single manufacturer, and the only shingle manufacturer to be presented with the Good Housekeeping seal.

What is a composite shingle?

The same thing as an asphalt shingle; any shingle constructed of a base (fiber glass or organic), asphalt and granules.

« StartPrev123456NextEnd »

Page 5 of 6